Products
Design and Consulting
Services
L-3 Telemetry-East
can provide on-site support to customers for System Installation
and Integration.
Normally this support is limited to the actual hardware
and software furnished by L-3 Telemetry-East. It is usually
the customer’s responsibility to provide the inter-unit
cabling, wiring, sensors and sensor cabling, and power
wiring.
Depending upon contractual requirements,
L-3 Telemetry-East will provide recommendations and assistance
during the
hardware installation phase and will conduct an on-site
ATP to confirm equipment/system operation. If required
by the customer, Spares Kits can be proposed to support
the extended operation of the equipment or system.
Design Consultation
In normal circumstances, L-3 Telemetry-East will respond
to a customers RFQ/RFP/RFI with a Proposal outlining
a technical solution and a price. Occasionally, a requirement
may not yet be fully defined, or may have multiple solutions
with varying cost, schedule, and/or performance impacts.
L-3 Telemetry-East can provide design consultation to
the customer on a Fixed Price or Time and Materials basis
to help define a suitable solution to a customers requirement.
The end result may be a set of specifications, recommendations,
or even bread-board/brass-board hardware as proof of concept.
Training
Training Courses can be provide in support of products
or systems and can be conducted at the customers facility
or at the L-3 Telemetry-East facility. Training outlines
and course content can be mutually arranged to provide
the student (s) with emphasis on operation, maintenance,
or both. Course materials usually use the actual Operation
and Maintenance Manuals furnished with the hardware.
On-Site Training Courses are usually conducted during
installation at the customers facility or immediately after
installation to reduce transportation cost from multiple
trips.
System Design
Due to L-3 Telemetry-East’s extensive experience
in virtually all phases of Telemetry Instrumentation and
Aircraft Flight Test applications, a technical capability
exists that covers a wide variety of requirements. This
includes Missile, Aircraft, and Rocket design capabilities
from small air-launched missiles to large Launch Vehicles
including the Shuttle.
Other experience includes installation of complete Ground
Stations including Tracking Antennas, Telemetry Receivers,
and Demodulation/Decommutation hardware and subsequent
Data Processing Systems and software.
In addition, L-3 Telemetry-East has significant
experience with miniaturized, extremely rugged Telemetry
Systems for
projectile applications involving Hi-G shock requirements.
In any event, L-3 Telemetry-East stands ready to apply
this extensive experience to a customer’s needs and
to recommend a variety of solutions providing a cost/performance
tradeoff for evaluation by the customer.
Installation Support
L-3 Telemetry-East can provide on-site support to customers
for System Installation and Integration. Normally this
support is limited to the actual hardware and software
furnished by L-3 Telemetry-East. It is the customer’s
responsibility to provide the inter-unit cabling, wiring,
sensor cabling, and power wiring.
L-3 Telemetry-East will provide recommendations and assistance
during the hardware installation phase and will conduct
an on-site ATP to confirm equipment/system operation. If
required by the customer, Spares Kits can be proposed to
support the extended operation of the equipment or system.
