About Us
L-3 Communications Telemetry-East
1515 Grundy's Lane
Bristol, PA 19007 USA
Main Office: (267) 545-7000
Fax: (267) 545-0100
e-mail: te.salesmktg@L-3com.com
BACKGROUND
Telemetry-East
is founded on the heritage of Aydin Telemetry, L-3
Microcom, and
L-3 Microdyne; world leading manufacturers and suppliers of Missile
and Aircraft Flight Test Instrumentation, Airborne & Ground Telemetry Products
and Systems.
The combined
strengths of these three companies provide nearly 125 years of
design, engineering and manufacturing expertise, backed by over
a billion dollar corporation, to offer the highest quality airborne
data acquisition, signal conditioning, telemetry and ground support
products.
BUSINESS AREA
Telemetry-East's Airborne Telemetry and Flight
Test Products & Systems gather and process critical information
onboard spacecraft, aircraft, missiles, guided weapons, targets,
UAV's and ground . Data is recorded and/or transmitted by radio
links to fixed or mobile receiving stations. These products are
ruggedized for extreme environments. Telemetry-East's ground
products receive, analyze, distribute and display information
collected.
Telemetry-East's
products are used in defense and aerospace programs such as aircraft
and weapons development, flight test and satellite communications
for space agencies including NASA. Some of our capabilities and
products include:
From Philadelphia Airport
(PHL) going North
Depart Philadelphia International Airport.
Proceed North on I-95 North.
Exit I-95 at Route 413-Bristol (Exit 40). At the end of the off ramp, turn
left onto Rt. 413 North. Proceed to the second traffic light (Ford Road). There
is a Getty gas station on the right. Turn left onto Ford Road. Go through a
residential area until you come to the traffic light - Newportville Road. Turn
left onto Newportville Road and proceed .4 of a mile to Keystone Industrial
Park. Turn left into the park onto Grundy’s Lane. L-3 TE is the second
building on the right. Go to the second driveway on the right (1515 Grundy’s
Lane) to access the main entrance of the facility.
From New Jersey going South
Proceed on New Jersey Turnpike South to Exit 6. (Pennsylvania Turnpike)
After Toll Booth (Burlington/Florence, NJ) continue on roadway.
Proceed across bridge, pay toll and follow signs to Pennsylvania Turnpike
Exit 358 (First exit after paying toll for bridge).
Turn onto Route 13 South.
Proceed until you come to Newportville Road (approximately 5 traffic lights).
Turn right onto Newportville Road.
Continue on Newportville Road and turn right at Grundy’s Lane (the first
street past the overpass, at the entrance are signs for Keystone Park).
Continue on Grundy’s Lane to the second building on the right (1515 Grundy’s
Lane). Proceed to second driveway on the right to access main entrance of facility.
From Pennsylvania Turnpike
going East or West
Take Pennsylvania Turnpike to Delaware Valley Exit 358.
Turn onto Route 13 South.
Proceed until you come to Newportville Road (approximately 5 traffic lights).
Turn right onto Newportville Road.
Continue on Newportville Road and turn right at Grundy’s Lane (the first
street past the overpass, at the entrance are signs for Keystone Park).
Continue on Grundy’s Lane to the second building on the right (1515 Grundy’s
Lane). Proceed to second driveway on your right to access main entrance to
facility.
For Maps, use www.mapquest.com and enter:
1515 Grundy’s Lane
Bristol, PA 19007
Mapquest also provides From/To driving directions.
STAFF AND FACILITY
Situated in historic Bucks County 20 miles north
of Philadelphia, Pennsylvania, USA,
Telemetry-East employs 300 people in the design and manufacture of sophisticated
electronic components and systems. Our new, state-of-the-art 85,000 square
foot facility houses complete design, fabrication and manufacturing facilities.
More than
25% of our current population is devoted to engineering, employed
in various phases of new product development, manufacturing support,
and ongoing customer support. Telemetry-East offers hundreds
of individual products which are sold separately, or system-integrated
for turn-key applications. Our experienced staff of engineers
are ready to help define the best solutions for your challenge.
Currently,
in excess of 55% of our workforce is solely dedicated to manufacturing
and its associated support functions.
PRODUCT & QUALITY ASSURANCE
All Telemetry-East products are manufactured in accordance
with the requirements of IPC-A-610C Class 3 and ANSI-J-STD-001.
Every manufactured unit is fully tested to a comprehensive acceptance
test procedure, which includes full performance testing at thermal
extremes. L-3 Communications Telemetry-East's quality system is
ISO 9001:2000 approved by KEMA-Registered Quality, Inc.
