|
Solid Front LED Indicator
Model ML 2030E
|
 |
|
Provides
water tight panel seal
Designed for use where a watertight panel seal is
required for system performance. Can be used as a
function indicator on aircraft avionics systems, test
equipment, medical equipment, machine tools, and wherever
severe environmental conditions are present.
Cleared by DOD/OFOISR for public
release under 06-S-1325 dated April 18, 2006.
|
 |
|
| • |
O-Ring Panel Seal |
| • |
Dual Finish Case |
| • |
EMI Screen Standard |
| • |
Performs in Severe Environments |
| • |
Low Power Use |
| • |
High Luminosity |
| • |
Rugged Construction |
| • |
Custom Configurations Available
including Bi Color LED and NVIS compatible filtering |
|
|
| Case:
Aluminum, black anodized front bezel with conductive
clear chromate body. |
| Mounting:
Front panel mount with 5/16-32” nut and lock
washer. |
|
Seal: Environmentally sealed case |
| O-Ring:
Fluoro silicone rubber |
|
| |
Vibration:
.06” D.A. or 20 G’s Peak, whichever
is less, 10 Hz to 2 kHz,
MIL STD 202, Method 204, Test Condition D. |
| Shock:
100 G’s MIL STD 202, Method 213, Test Condition
I. |
| Moisture
Resistance: (Humidity): MIL STD 202, Method
106. |
| Altitude:
100,000 ft., MIL STD 202, Method 105, Test Condition
D. |
| Reliability:
Operational 6 x 106 hours min. MTBF @ 25 C°
|
| Salt
Spray: MIL STD 202, Method 101, Test Condition
B. |
|
|
| Color |
Red |
Yellow
|
Green |
| Forward Voltage (VDC) |
1.9
|
2.0
|
2.1 |
| Peak Forward Current (mA
DC) |
90
|
60
|
90 |
| DC Forward Current (ma
DC)* |
30 |
20 |
30 |
| Reverse Voltage (VDC) (IR=100µA)
|
5 |
5
|
5 |
| Power Dissipation (mW)
|
135 |
85 |
135 |
Luminous
Intensity (mcd) typical
|
Non-Diffused |
| @ If =20
ma
|
Diffused |
|
40
|
40 |
30 |
| 8 |
8 |
8 |
| Dominant Wave Length (nm)
typical |
626 |
585 |
569 |
| Viewing Angle (2 Ø 1/2
) typical |
Non-diffused |
| |
Diffused |
|
30° |
30° |
30° |
| 60° |
60° |
60°
|
| Operating Temperature (°C)
|
-55
to +100 |
-55
to +100 |
-20
to +100 |
| Storage Temperature (°C)
|
-55
to +100 |
-55
to +100 |
-55
to +100 |
| Lead Soldering Temperature
|
260°C
for 5 seconds |
|
|
* For
red and green, derate linearly from 50°C
@ 0.5 mA/°C. For yellow derate linearly
from 50°C @ 0.2 mA/°C |
|
|
| When
ordering, show basic part number first, LED color, lens
type, and terminals. If this part requires customization,
a special factory assigned modification number will
be assigned to the end of the ordering number.
Example: Basic model with a red LED, a diffused lens,
and straight leads would be ML 2030E-R-D-LT |
|
ML2030E
- R - D
- LT
- S ( )
| Basic
Model Number |
LED.
Color |
Lens
Type |
Terminal
Style |
Factory
Modification
Number if Special |
| |
|
|
|
|
| ML
2030E |
R
Red |
ND
Non-Diffused |
ST
Straight Lead |
S.+
ID No. |
| |
Y
Yellow |
D
Diffused |
LT
Solder Loops |
|
| |
G
Green |
|
|
|
|
NOTE:
Dimensions in inches. Tolerances: ± ..010 for two-place
decimals;
± .005 for three-place decimals.
| This
PDF contains a printable version of the hard copy
catalog page. |
 |
L-3-EDI
ML2030E.pdf |
|
Note: Viewing and printing PDF files requires
the free Adobe Acrobat Reader program. You can
download Acrobat Reader from Adobe's
web site. |
|
|
