Products
Design and Consulting Services

L-3 Telemetry-East can provide on-site support to customers for System Installation and Integration. Normally this support is limited to the actual hardware and software furnished by L-3 Telemetry-East. It is usually the customer’s responsibility to provide the inter-unit cabling, wiring, sensors and sensor cabling, and power wiring.

Depending upon contractual requirements, L-3 Telemetry-East will provide recommendations and assistance during the hardware installation phase and will conduct an on-site ATP to confirm equipment/system operation. If required by the customer, Spares Kits can be proposed to support the extended operation of the equipment or system.

Design Consultation
In normal circumstances, L-3 Telemetry-East will respond to a customers RFQ/RFP/RFI with a Proposal outlining a technical solution and a price. Occasionally, a requirement may not yet be fully defined, or may have multiple solutions with varying cost, schedule, and/or performance impacts.

L-3 Telemetry-East can provide design consultation to the customer on a Fixed Price or Time and Materials basis to help define a suitable solution to a customers requirement. The end result may be a set of specifications, recommendations, or even bread-board/brass-board hardware as proof of concept.

Training
Training Courses can be provide in support of products or systems and can be conducted at the customers facility or at the L-3 Telemetry-East facility. Training outlines and course content can be mutually arranged to provide the student (s) with emphasis on operation, maintenance, or both. Course materials usually use the actual Operation and Maintenance Manuals furnished with the hardware.

On-Site Training Courses are usually conducted during installation at the customers facility or immediately after installation to reduce transportation cost from multiple trips.

System Design
Due to L-3 Telemetry-East’s extensive experience in virtually all phases of Telemetry Instrumentation and Aircraft Flight Test applications, a technical capability exists that covers a wide variety of requirements. This includes Missile, Aircraft, and Rocket design capabilities from small air-launched missiles to large Launch Vehicles including the Shuttle.

Other experience includes installation of complete Ground Stations including Tracking Antennas, Telemetry Receivers, and Demodulation/Decommutation hardware and subsequent Data Processing Systems and software.

In addition, L-3 Telemetry-East has significant experience with miniaturized, extremely rugged Telemetry Systems for projectile applications involving Hi-G shock requirements. In any event, L-3 Telemetry-East stands ready to apply this extensive experience to a customer’s needs and to recommend a variety of solutions providing a cost/performance tradeoff for evaluation by the customer.

Installation Support
L-3 Telemetry-East can provide on-site support to customers for System Installation and Integration. Normally this support is limited to the actual hardware and software furnished by L-3 Telemetry-East. It is the customer’s responsibility to provide the inter-unit cabling, wiring, sensor cabling, and power wiring.

L-3 Telemetry-East will provide recommendations and assistance during the hardware installation phase and will conduct an on-site ATP to confirm equipment/system operation. If required by the customer, Spares Kits can be proposed to support the extended operation of the equipment or system.